畅享聊:SolidWorks学习(28)（solidworks基础教学视频）

分享兴趣，传播快乐，增长见闻，留下美好！

亲爱的您，这里是LearningYard新学苑。

今天小编为你带来

畅享聊：SolidWorks学习（28）

欢迎您的访问！

Share interests, spread happiness, increase knowledge, and leave beautiful!

Dear you, this is LearningYard Academy.

Today, the editor brings you

Changxiang Chat:SolidWorks Learning (28)

welcome your visit!

今天，我们绘制底座，以及舵机连接板。首先我们绘制底座，首先看着这个零件图，整体的轮廓我们可以先画侧视图这样的草图，再拉伸，也可以分为竖块部分和横块部分。我们这里选择后者吧，因为横块上有几个洞，在绘制横块时我们一并将其画出来。

Today, we will draw the base and servo connection board. First, let's draw the base. Looking at this part diagram, we can sketch the overall outline in a side view and then stretch it. It can also be divided into vertical and horizontal sections. Let's choose the latter here, because there are several holes on the horizontal block, and we will draw them together when drawing the horizontal block.

画好上面的部分后，我们再来画竖块的孔洞，这里内部为M3螺纹孔，画完孔后通过剖视图看一下孔是否画对。再将上面的斜角切出来，中间的圆孔画出来，就像下面的操作一样，画完记得保存。

?

After drawing the upper part, let's draw the holes for the vertical block again. Here is the M3 threaded hole inside. After drawing the hole, check if it is drawn correctly through the sectional view. Cut out the diagonal angle on top and draw the circular hole in the middle, just like the operation below. Remember to save it after drawing.

下面我们来画第二个零件，这是个舵机连接板，这个零件就很简单了，一块小板上几个孔。这个小板的形状不是规则的长方体，我们先把它侧面画出来在拉伸，这样比较方便，然后再按照图纸进行打孔即可。

?

Now let's draw the second part, which is a servo motor connecting plate. This part is very simple, with several holes on a small plate. The shape of this small board is not a regular rectangular prism. Let's first draw its side and stretch it for convenience, and then drill holes according to the drawing.

今天的分享就到这里了。

如果您对今天的文章有独特的想法，

欢迎给我们留言，

让我们相约明天，

祝您今天过得开心快乐！

That's it for today's sharing.

If you have a unique idea about today’s article,

Welcome to leave us a message,

Let us meet tomorrow,

I wish you a nice day today!

本文由learningyard新学苑原创，如有侵权，请联系我们。

部分内容参考于bilibili，百度

翻译来源：通义千问

文字排版｜calm

审核｜Dongyang